Mounting-clip Screw, for Mini-rail Picture Hanging Track (Installation Fitting)

Installation fitting for the mini-rail gallery systems picture hanging track. The mounting-clip screws are installed directly into a solid brick or drywall plasterboard wall; the aluminium mini-rail is then placed over them and 'clipped' downwards, securing the picture rail track length to the wall. These are heavy duty brass mounting-clip screws, so the mini-rail is able to hang large heavy framed artwork. N.B. For a solid rail installation, mini-rail tracking requires 3  mounting-clip screws per meter.

Mini-rail track Installation:

• Mark points every 30 cm along the wall where you require the tracking. N.B. These are positions for the mounting-clips
• Drill holes on these points, and insert wall plugs into them
• Insert and screw 'mounting-clip screw' into the wall
• Repeat the above for each hole drilled
• Take your length of mini-rail, place the top-edge of the rails rear slot over the mounting-clip screw, and push downwards
• The picture rail will now 'click' onto the clips
  (For all mini-rail system fittings, please see *ACCESSORIES below)