A3 Retail Glass Shelf Unit, Dual-sided Shelving & Poster Display

This dual-sided glass shelving unit is fully adjustable on the suspended cables, including the A3 poster display panel, and can be installed literally anywhere on your shop floor! A single 30x30cm toughened safety glass sheet is supported by 4 cables that are fixed between the ceiling & floor, and can be positioned at any height required. The acrylic poster panel is suspended on it's own cables, that are fixed between the ceiling & shelf, and can also be fully adjusted in height! It is also possible to customize this unit. The poster panel can display posters on both sides and creates the dual-sided effect; but If you only need the display stand to be single-sided (e.g. if it's against a wall etc.), you can mount the poster panel on the rear shelf cables, which also doubles the depth of the glass shelf! All polished chrome fittings & 1.5mm steel cables (also compatible with our window display systems!). A complete glass shelving unit consists of:

• 1 glass shelf piece, 30cm x 30cm (creates 2 30cm x 15cm shelves)
• 4 ceiling to floor cables & fittings, 4m length (supports shelf)
• 1 A3 acrylic poster panel/pocket (dual-sided)
• 2 ceiling to shelf cables & fittings (supports panel)

Ceiling to floor cable installation:

1. Separate the ceiling & floor fittings from the brass screw mounts concealed inside their chrome shell
2. Screw the first brass mount into the top/ceiling, and reattach the ceiling shell with cable
3. With the cable now suspended, align the position for the floor fitting and screw in the second brass mount
4. Thread the cable into the floor fitting shell & tension spring, in that order
5. Secure the cable stopper, and cut off any access cable
6. Reattach the floor fitting shell over the brass mount (The spring inside is design to maintain cable tension)
7. Do above steps for remaining ceiling to floor cable, keeping in mind the width of your shelving!

N.B. For additional cables & fittings, see *ACCESSORIES below