Hanging Shelves On Cables Kit, Ceiling-to-Floor & Under-Shelf Supports Set (For Shelving with Holes)

Hanging Shelves On Cables Kit:

• (4x) Ceiling-to-Floor fixings, with 4m steel cable (easily cut cable to exact length during installation)
• (4x) Under-Shelf Support (per shelf)
• Hex / Allen Keys, screws and wall plugs
• N.B. Cable Kit & Supports have a weight capacity of 20kg per shelf board - Not included

Ceiling-to-Floor Cable Fittings Installation:

1. Separate the ceiling & floor fittings from the brass screw mounts concealed inside their chrome caps.
2. Screw the first brass mount into the top/ceiling, and reattach the ceiling-fitting cap with cable.
3. With the wire now suspended, align the position for the floor fitting and screw in the floor mount.
4. Now thread the cable into the floor-fitting cap & tension spring (in that order!)
5. Secure the cable stopper and cut off any access cable.
6. Reattach the floor cap into the floor mount - The spring inside will maintain cable tension.
7. Do the above steps for the second ceiling-to-floor cable - keeping in mind the width of the supports & shelf boards.
8. Once all cables are installed, unscrew floor fitting to add shelf boards and Under-Shelf Supports to cables.