Wall Mounted Rod Display Fittings, Chrome Finish (Rod Not Included)

Wall mounted rod display installation:

1. Mark on the wall the position you require your first top fixing
2. Using a 'level' tool as a guide, measure and mark the distance for the bottom fixing
3. Drill holes, and insert wall plugs (N.B. Make sure wall plugs are fully inserted & flush with the walls surface)
4. Using a hex allen key, unscrew the small bolt on each fixing, and separate their chrome cap from the brass mount inside
5. Screw the brass mounts into the wall
6. Place chrome caps back onto the brass mounts, and re-tightening the small bolt (brass mount should be completely hidden).
7. Your rodding is slotted into the wall mounts, and secured in place by the larger rubber-tipped allen bolts on the front of the fittings
8. Repeat above steps for all remaining fixtures, using your level tool again to mark across (left or right) the adjacent top fixing

Tip: The wall fittings can also be installed to support a rod horizontally, enabling you to use our acrylic hook-on display panels!