False Ceiling-to-Floor Twist-On Fixed Wire Kit (Cable Display for Suspended Ceilings)

• The False Ceiling-to-Floor Twist-On Fixed Wire Kit is a cable display compatible with suspended ceiling grids and false ceiling grid-based systems! 
• This hanging kit is perfect for ceiling-to-floor cable display systems, in rooms & offices with suspended ceiling tiles (that prevent drilling or screws!)
• Create wall & window displays in real estate agents, retail showrooms, waiting rooms, and reception areas.
• Add poster panels or brochure holders in various sizes to the suspended wires for displaying advertisements or dispensing catalogues, magazines, and leaflets!
• Installing the ceiling fitting requires no nails & tools, and removing the hanging system entirely does not cause any damage to your ceiling grid!
• The floor fitting uses a single screw, and attaching the ceiling hanging cable requires no tools! (Fixed cables are ideal for drafty corridors and halls)
• Choose between a satin chrome/silver or white-coated ceiling fitting with a strong anodised 1.5mm steel cable, 4m length (Cut to size during installation).
• This cable display system has a load/weight capacity of 20kg!

False Ceiling-to-Floor Twist-On Fixed Wire Kit - includes:

• (1) Twist-on hanger clip (silver or white)
• (1) 4m hanging wire (cut exact lengths during installation)
• (1) Floor fitting (silver)

Installing the cable display:

1. Attach the Twist-on hanger clip & cable to the ceiling grid by twisting the fitting, then allow the cable to hang freely.
2. Do not disconnect the cable from the ceiling fitting; you will adjust the cable length later within the floor component.
3. Unscrew the floor fitting, which will separate into two sections, plus a spring.
4. Screw the small piece of the floor fitting into the floor.
5. Thread the cable into the larger piece & the spring of the floor fitting.
6. Add & adjust the cable-stopper to your preferred position on the cable end.
7. Place the large section back onto the small piece (now with cable attached) and screw it tight.
8. The internal spring inside the larger section will give tension to the cable! (If the cable is still loose, remove and re-adjust the cable-stopper!)

For further information & advice, please call: +44(0)20 8312 1007 or +44 (0)20 7998 6911 or email us here.