A0 Ready-made Rod Set, Wall Fittings & Poster Pockets (Portrait & Landscape)

Create a professional pos display, premium signage hanger, window or reception area displays; ideal for estate letting agents, travel agencies, restaurants, hair & beauty salons, small retail shops & large department stores! These wall mounted rod systems are easy to install, and can be integrated anywhere in your venue! High quality professional acrylic pockets require no tools to insert & remove posters, and are dual-sided for simultaneous inward/outward displaying! N.B. A single pocket can display posters 'back-to-back' inward & outward facing, ideal for windows!

Ready-made A0 rod display set consists of:

• 4x 6mm display rods 1.5m (screw together for longer lengths)
• 4x Wall mount fixture
• A0 Poster pocket, portrait or landscape
• 4x Panel support (per pocket)

Wall mounted rod display installation:

1. Mark on the wall the position you require your first top fixing
2. Using a 'level' tool as a guide, measure and mark the distance for the bottom fixing
3. Drill holes, and insert wall plugs (N.B. Make sure wall plugs are fully inserted & flush with the walls surface)
4. Using a hex allen key, unscrew the small bolt on each fixing, and separate their chrome cap from the brass mount inside
5. Screw the brass mounts into the wall
6. Place chrome caps back onto the brass mounts, and re-tighten the small bolt (brass mount should be completely hidden).
7. Your rodding is slotted into the wall mounts, and secured in place by the larger rubber-tipped allen bolts on the front of the fittings
8. Repeat above steps for all remaining fixtures, using your level tool again to mark across (left or right) the adjacent top fixing