Double A4 Pocket Wall/Wall Rod Set - Complete Rod Display & Twin Acrylic Panel (2A4, Portrait)

The double A4 pocket with wall/wall rod display system creates professional displays for POC areas, advertising spaces & window displays ideal for estate agents, travel agencies, restaurants, hair & beauty salons, small retail shops & large department stores! This wall-mounted suspended rod system is easy to install. The high-quality professional twin acrylic panel has two a4 portrait pockets/inserts on one panel. They require no tools to insert & remove the posters and are dual-sided for simultaneous inward/outward displaying! Rod fittings are available in a satin chrome finish. N.B. A double A4 pocket can present posters 'back-to-back' inward & outward facing

The double A4 pocket wall/wall rod set consists of:

• 4x 6mm display rods 1.5m (screw two rods together for 3m length)
• 4x Wall fixture
• 'Selected' quantity of panels
• 4x Panel support (per panel)

Wall-mounted rod display installation:

1. Mark the position you require your first 'top' wall-fixing.
2. Using a 'level' tool as a guide, measure and mark the distance for the bottom fixing.
3. Drill holes and insert wall plugs (N.B. Make sure wall plugs are fully flush with the wall surface).
4. Using a hex Allen key, unscrew the small bolt on each fixing, and separate their chrome cap from the brass mount (inside)
5. Screw the brass mounts into the holes.
6. Place chrome caps back onto the brass mounts and re-tighten the small bolt.
7. Your rodding is slotted into the wall mounts and secured by the larger rubber-tipped Allen bolts on the front of the fittings.
8. Repeat the above steps for all remaining fixtures, first using your 'level tool' to mark the position for the adjacent top wall-fixing.